Nauticam Water Housing for Nikon Z7

Hollywood Divers

  • $3,450.00


Nauticam underwater housing for the Nikon Z7/Z6 camera. Key controls are placed within an easy reach from the ergonomic, rubberized handles with unmatched ease of use. Controls on the housing are placed exactly where they should be for easiest access in water, regardless of the camera layout.

The Z7 and Z6, Nikon's first full-frame mirrorless cameras offer underwater shooters the same legendary Nikon sensors with the versatility of an electronic viewfinder and the more compact form factor of a mirrorless system.  The NA-Z7 supports both the Z6 and Z7 models. 

Unmatched Ergonomics

Regardless of where the control is located on the camera, the Nauticam NA-Z7 housing puts them where you need them to be underwater.  For those switching between photo and video modes, an easily reachable switch is located on the right rear of the housing.  The right side double thumb lever, easily reached from the right handle features access to the AF-on and Record buttons respectively.  Between the double thumb lever and the multi-stage shutter release is an ISO lever allowing quick changes to sensitivity.

The left double thumb lever accesses the DISP and Playback controls.  The Zoom In and Zoom Out controls, located on the right rear of the camera body is relocated to the left side of the housing to a location more familiar to Nauticam housing users.

The switch that allows for switching between the LCD display and the EVF, a crucial and much used control with mirrorless systems is located close to the left handle within easy reach. 

F and Z Mount Support

The Nauticam NA-Z7 housing allows not only the use of the new Z mount Nikon glass but also the F mount lenses with the Nikon FTZ Adapter.  This is critical as the new Z mount lenses are being phased in over the next few years.  The Nauticam NA-Z7 housing features two lens release buttons that correspond to either F or Z mount lenses.  When switching between F and Z mount lenses, the camera must be removed from the housing to remove the adapter.  When working within either the F or Z mount system use the appropriate lens release button to switch lenses without having to remove the camera from the housing.  A vacuum system reset switch is located below the tray as well so there is no need to open the rear of the housing during lens or port changes. See the 180 MM glass Dome for the Nikon 16 - 35 mm f4 lens with z adapter

What's In The Box:

  •     Nauticam NA-Z7 Housing
  •     90122 Housing O-ring, lubricant and removal tool
  •     CR2032 Battery (for vacuum system)
  •     Allen Wrench Set

Details and Specifications

  •     Depth Rating:  100m
  •     Weight: 3.02 kg
  •     Dimensions: 360mm x 200mm x 160mm (W x H x D)

We Also Recommend